$1,526.25–$1,700.95Price range: $1,526.25 through $1,700.95 Incl GST
Free Delivery NZ Wide (ex RD). The price listed is for supply only, for supply & installation enquiries visit our Hot Water Cylinder Installation page or call 0800 234 800 and speak to your local rep.
The Rheem All-Pressure Vitreous Enamel (APVE) 180L is an indoor electric hot water cylinder that works on any water pressure. Connect it to your existing low pressure system today, then upgrade to mains pressure later with a simple valving change, with no new cylinder needed. 180L is the most common cylinder size in New Zealand homes and suits a household of 2 to 3 people.
Six Shapes to Fit Your Cupboard
Replacing a cylinder usually means working with the cupboard you’ve already got. The 180L comes in six different footprints, from a tall, slim 488mm wide unit to a short, wide 610mm unit, so you can match the space without building work. Choose your size and element from the options above.
Dimensions (W x H)
Shape
Model (2kW / 3kW)
488 x 1715mm
Tall & slim
14818013AP / 14818015AP
510 x 1505mm
Mid-height
16T18013AP / 16T18015AP
540 x 1350mm
Mid-height
54T18013AP / 54T18015AP
560 x 1220mm
Short
14T18013AP / 14T18015AP
580 x 1135mm
Short & wide
15818013AP / 15818015AP
610 x 1015mm
Lowest profile
12T18013AP / 12T18015AP
Sizing is within +/- 5mm due to manufacturing. Allow extra clearance for pipework and seismic restraints.
2kW or 3kW Element?
Every footprint is available with a 2.0kW or 3.0kW copper screw-in element. A 3kW element reheats the cylinder faster, which helps busy households, while 2kW suits smaller households. Both run on a standard 230V supply and must be connected by a registered electrician.
Built to Last
The vitreous enamel lining gives the inside of the cylinder a hard, hygienic finish that resists rust and corrosion, and it handles a wide range of New Zealand water conditions. The cylinder has a galvanised outer finish and a triple inlet as standard.
Made in New Zealand
The APVE range is designed and manufactured in New Zealand, meets New Zealand Minimum Energy Performance Standards (MEPS), and is backed by Rheem’s nationwide sales and service network.
Warranty
Domestic installations are covered by a 10-year cylinder replacement warranty, 5 years cylinder labour, and 1 year parts and labour.
$2,137.05–$2,144.12Price range: $2,137.05 through $2,144.12 Incl GSTSelect options
This product has multiple variants. The options may be chosen on the product page
$1,517.06–$1,654.97Price range: $1,517.06 through $1,654.97 Incl GSTSelect options
This product has multiple variants. The options may be chosen on the product page
Rheem All-Pressure Indoor 180L Hot Water Cylinder
$1,526.25 – $1,700.95Price range: $1,526.25 through $1,700.95 Incl GST
Free Delivery NZ Wide (ex RD). The price listed is for supply only, for supply & installation enquiries visit our Hot Water Cylinder Installation page or call 0800 234 800 and speak to your local rep.
Description
The Rheem All-Pressure Vitreous Enamel (APVE) 180L is an indoor electric hot water cylinder that works on any water pressure. Connect it to your existing low pressure system today, then upgrade to mains pressure later with a simple valving change, with no new cylinder needed. 180L is the most common cylinder size in New Zealand homes and suits a household of 2 to 3 people.
Six Shapes to Fit Your Cupboard
Replacing a cylinder usually means working with the cupboard you’ve already got. The 180L comes in six different footprints, from a tall, slim 488mm wide unit to a short, wide 610mm unit, so you can match the space without building work. Choose your size and element from the options above.
Sizing is within +/- 5mm due to manufacturing. Allow extra clearance for pipework and seismic restraints.
2kW or 3kW Element?
Every footprint is available with a 2.0kW or 3.0kW copper screw-in element. A 3kW element reheats the cylinder faster, which helps busy households, while 2kW suits smaller households. Both run on a standard 230V supply and must be connected by a registered electrician.
Built to Last
The vitreous enamel lining gives the inside of the cylinder a hard, hygienic finish that resists rust and corrosion, and it handles a wide range of New Zealand water conditions. The cylinder has a galvanised outer finish and a triple inlet as standard.
Made in New Zealand
The APVE range is designed and manufactured in New Zealand, meets New Zealand Minimum Energy Performance Standards (MEPS), and is backed by Rheem’s nationwide sales and service network.
Warranty
Domestic installations are covered by a 10-year cylinder replacement warranty, 5 years cylinder labour, and 1 year parts and labour.
Not sure which size or footprint fits your home? Give us a call on 0800 234 800 or get a free quote.
Additional information
488 x 1715mm, 510 x 1505mm, 540 x 1350mm, 560 x 1220mm, 580 x 1135mm, 610 x 1015mm
2.0kW, 3.0kW
Rheem
All Pressure Vitreous Enamel (APVE)
All Pressure (low or mains)
180L (approx.)
Indoors
Copper (T/P) Screw-In
60°C to 75°C
850kPa
RP ¾ 20mm
Triple Inlet
230–240V / 50Hz AC
Galvanised
Vitreous Enamel
New Zealand
10 Years
5 Years
1 Year
Related products
Rheem All-Pressure Indoor 250L Hot Water Cylinder
$2,137.05 – $2,144.12Price range: $2,137.05 through $2,144.12 Incl GSTSelect options This product has multiple variants. The options may be chosen on the product pageRheem All-Pressure Indoor 90L Hot Water Cylinder
$2,164.81 Incl GSTSelect options This product has multiple variants. The options may be chosen on the product pageRheem All-Pressure Indoor 135L Hot Water Cylinder
$1,517.06 – $1,654.97Price range: $1,517.06 through $1,654.97 Incl GSTSelect options This product has multiple variants. The options may be chosen on the product page